150m 2 of exposed aggregate polished concrete with a satin finish was applied throughout the entire house, utilizing 10mm aggregate in Worcester. The property underwent a renovation, transforming a bungalow with a substantial front extension. Wet underfloor heating was installed across all floors to efficiently heat the expansive open space. Conventional 10mm concrete was poured and placed over three levels in this home, which offers views of the countryside. We employed dia

We carried out a extensive renovation on a failed existing floor at the Wyre Forest Café for GoApe replacing it with a Polished Concrete Overlay The floor previously had a self levelling compound poured over concrete and brickwork that had delaminated & cracked due to poor surface prep of the subfloor. Removing the failed floor we used diamond grinding that also keyed the subfloor as part of our prep for a 10mm Rapidset Tru Overlay. Two large skips were needed to remove brick

VARIABLE FINISH POLISHED CONCRETE INSTALLED FOR A NEW FARM SHOP AT DAYLESFORD FARM. WE APPLIED OUR VARIABLE FINISH INVOLVING A LIGHT GRIND TO THE NEWLY LAID POWERFLOATED FLOOR. THIS PROCESS REMOVES A SMALL AMOUNT OF THE FLOORS SURFACE TO EXPOSE THE FINES FROM THE AGGREGATES IN THE SAND AND IN SOME AREAS SLIGHLT LARGER STONE CLOSE TO THE SURFACE. WE CARRIED OUT A SAMPLE BEFORE HAND SUPPLIED BY THE MAIN SITE CONTRACTORS USING THE SAME CONCRETE FROM A NEARBY CONCRETE COMPANY. TH

Vairable finish polished concrete on the outskirts of kidderminster for a new self build property. The concrete had been placed a few months before we arrived onsite and had passed its curing stage. The slab had been placed and finished with a power trowell to a tigh pan finish to flatten and compact the aggregates in the top level of the surface leaving the floor at a good starting point for polishing. Our aim was to remove only the top roughness from the original slab usin

EXPOSED AGGREGATE KITCHEN DINNER POLISHED CONCRETE FLOOR FOR A EXTENTION WITH 6M WIDE SLIDING DOORS ALLOWING PLENTLY OF LIGHT IN. Our customer came to us wanting a low maintenance floor and something also out of the ordinary. With the local concrete plant being a stones throw down the road and the quarry not much further we used concrete with sand and stone from the local area and ground the surface before polishing polishing to a high g loss. By doing this the customer had t